Contact Us
Contact: cherry
Mobile: +86-13395117688

TEL:+86-510-83212111

Fax: +86-510-83213999
E-mail: cdp@dipowell.com
Address: No.20, Changhui Rd., Fengdian Park, Huishan Economic Development Zone, Wuxi, Jiangsu, China

Home > Knowledge > Content
Flooring laminating press protection system and pressure limiting function
Aug 13, 2018

The protection system of the flooring laminating press includes the protection of lifting action, heating, pressurization, etc. The floor laminating machine is equipped with a safety door micro switch at the loading position, and the equipment can only start running after the safety door is closed. When the sealing head is lowered to the proper position.

When the flooring laminating press is lowered to the proper position during operation, the floor presser activates the stroke switch by using four cylinders to simultaneously actuate the cylinder, and simultaneously touches the four stroke switches respectively to switch on the boosting system to start boosting.

Over temperature and under temperature alarms are set for heating protection.

The water pressure gauge of the floor laminating machine itself has a pressure limiting function, so that the upper limit pointer of the dial can be effectively adjusted to determine the range of the pressure limiting value, such as not being able to rise to the lower limit of the set value within the specified time or any time the pressure exceeds the setting. The alarm bell is alarmed when the upper limit is set.

http://www.dipuindustry.com/


Previous: Pressurized protection and supporting use of furniture board laminating press

Next: Careful segmentation design and temperature regulation of Short Cycle Laminating Hot Press