Contact Us
Contact: cherry
Mobile: +86-13395117688

TEL:+86-510-83212111

Fax: +86-510-83213999
E-mail: cdp@dipowell.com
Address: No.20, Changhui Rd., Fengdian Park, Huishan Economic Development Zone, Wuxi, Jiangsu, China

Home > Knowledge > Content
Structure design and application of door skin multi layer hot press
Jun 01, 2018

The door skin multi layer hot press can be used for the molding and veneering of melamine door skin and natural veneer door skin. This type of equipment generally adopts a spring-type synchronous closing structure, which can be stopped at any position according to the production process, that is, limit control, and The residence time is adjustable. Multi-barrier presses can automatically control the pressure holding time and pressure setting.

 

Not only that, the multi-layer door skin press also has two manual and automatic modes of operation, users can choose according to need. In order to ensure the efficient use of the equipment, we specially select high-quality steel in production, which can ensure that the hot platen does not break, does not deform, and has good stability.

 

At the same time, the main structure of the door skin multi layer hot press has been fully considered in the design, so it can ensure the stability and reliability of the fuselage during long-term use. During the work, the noise is very small, and it is corrosion-resistant and has enough strength and rigidity to cause harm to the surrounding environment and pollution. It also facilitates the installation, replacement and maintenance of other components.

 

This multi-layer door skin press uses a humanized design concept, which ensures the safety of workers during actual operation. In this way, the operator can not be injured by the hot platen of the hot press machine when the hot press machine is pasted and pasted. At the same time, it also simplifies the operation process, reduces the labor intensity, and improves the on-site working environment.

 

Because of the strict requirements in materials selection and structural design, multi-layered door skin presses have good performance. In use, it has the advantages of rapid temperature rise, even heating, and environmental protection and energy saving. The obtained hot press board veneer is dried, leveled, shaped and has remarkable effects.

 

As a user, we should regularly perform maintenance and maintenance while using multi-layered door presses. Pay attention to checking, maintaining and adding lubricating oil, cleaning dirt, etc. At the same time, we must also pay attention to regularly check the aging of electrical circuit wires, etc., replace the hot plate of multi-layer door skin presses, etc., and pay attention to ensure that the safety marking of the equipment is clear.

 

http://www.dipuindustry.com/


Previous: Short Cycle Laminating Hot Press specific types to understand and reference standards

Next: What are the advantages of alluminum honeycomb board press?