Contact Us
Contact: cherry
Mobile: +86-13395117688

TEL:+86-510-83212111

Fax: +86-510-83213999
E-mail: cdp@dipowell.com
Address: No.20, Changhui Rd., Fengdian Park, Huishan Economic Development Zone, Wuxi, Jiangsu, China

Home > Knowledge > Content
Advantages and protection system of synchronization laminating press
Jan 24, 2019

The protective system of the synchronous laminator is effective in protection, including lifting operation, heating, pressurization, and the like.

Advantages of using synchronization laminating press

1. The loading position of the synchronous laminator is equipped with a safety door micro switch, and the device can only start running after the safety door is closed.

2. When the sealing head is lowered to the appropriate position, the stroke switch is activated, and the four cylinders are simultaneously operated to lock the cylinder, and the four stroke switches are respectively activated, and then the boosting system is started to start boosting.

3. Over temperature and under temperature alarms are set for heating protection.

4. The water pressure gauge itself has a pressure limiting function, and the limit pointer on the dial can be adjusted to determine the range of pressure limiting values. The alarm bell sounds if it cannot rise to the lower limit of the set value within the specified time or whenever the pressure exceeds the upper limit of the set value.

5. If the outside is suddenly powered off during pressurization, all the electronically controlled valves of the machine will be placed in the power-off state, so that the cylinder does not operate according to the preset program, which will bring the risk of damage to the machine. To this end, the machine is equipped with a power-off protection valve to ensure that the head does not rise when it is suddenly powered off. After the safety is determined by the treatment, if the sealing head is to be raised, there is a manual air valve on the right side of the machine, and the sealing head can be raised by turning it. The valve is placed in a closed state during normal operation.

 

http://www.dipuindustry.com


Previous: Characteristics of heat transfer oil secondary circulation press and high heat transfer coefficient

Next: Pressing process and process of wood flooring hot press machine