Contact Us
Contact: cherry
Mobile: +86-13395117688

TEL:+86-510-83212111

Fax: +86-510-83213999
E-mail: cdp@dipowell.com
Address: No.20, Changhui Rd., Fengdian Park, Huishan Economic Development Zone, Wuxi, Jiangsu, China

Home > Knowledge > Content
Cleaning requirements and maintenance inspection of kitchen cabinet board production line
Aug 17, 2018

The kitchen cabinet board production line can run continuously for less than 10 hours per day during the working process, so that the cooling water can be cleaned and the pump can work normally. The water spindle motor must not be water-deficient during the operation. Phenomenon, it is necessary to periodically replace the cooling water during operation, so that the water temperature can be effectively prevented.

After each use, the kitchen cabinet board production line needs to be cleaned to a certain extent. To a certain extent, it is necessary to clean the dust on the platform and the transmission system, and periodically refuel the transmission system and lubrication during operation. In winter, if the working environment is fully automatic, the temperature of the computer engraving machine is too low. The parts of the screw rod and the polished rod (square rail or circular guide rail) should be cleaned with gasoline first, then the oil will be added. Otherwise, the resistance of the machine transmission part will be too large and the machine will be misplaced. . )

When carrying out the maintenance inspection, the kitchen cabinet board production line must pay attention to cut off the power supply. When the operation is performed, it is necessary to wait for the monitor to have no display or the main circuit power indicator light is extinguished, and the computer wood engraving machine can be performed. When not using the unit for a long time, wipe all parts clean and cover them with plastic or tarpaulin.

http://www.dipuindustry.com/


Previous: The use characteristics and design requirements of aluminum honeycomb panel press

Next: Pressure control and constant temperature of multilayer MDF press