Contact Us
Contact: cherry
Mobile: +86-13395117688


Fax: +86-510-83213999
Address: No.20, Changhui Rd., Fengdian Park, Huishan Economic Development Zone, Wuxi, Jiangsu, China

Home > Knowledge > Content
Floor laminator pressure control and constant temperature
Jun 27, 2018

The key point in the laminating process of the floor laminator is the pressure control. Under normal circumstances, the greater the pressure, the better the quality of the product. The pressure of the floor laminator should be increased steadily, and the pressure control accuracy should be high. When used, the constant pressure time must be accurately controlled and the product should be uniformly compressed in all directions. In order to meet its lamination process and product production requirements, the main design of the equipment should include the loading and unloading system, heating system, and pressure system. Four parts of the protection system.

1. The water in the heating container of the floor laminator reaches a certain constant temperature.

2. The product is loaded and the seal head drops.

3. Set the working pressure, constant pressure time, and apply pressure and hold pressure.

4. Automatic pressure relief after pressure maintenance

5. The seal head rises and the product is removed.


The pressure system of the floor laminator is mainly composed of pressure control instruments, pressure transmitters, pneumatic valves, and manual valves. The main function of the laminator is the pressure in the sealed container detected by the pressure transmitter. Size, effectively converts its pressure value to a 4-20 mA standard signal and transmits it to the signal input of the pressure control instrument.

Previous: Key components and control output of Furniture Board Laminating Press

Next: Short Cycle Laminating Hot Press process requirements and lifting