Contact Us
Contact: cherry
Mobile: +86-13395117688


Fax: +86-510-83213999
Address: No.20, Changhui Rd., Fengdian Park, Huishan Economic Development Zone, Wuxi, Jiangsu, China

Home > Knowledge > Content
Furniture lamination press constant pressure time must be accurate and work flow
Apr 11, 2018

The key point of the furniture lamination press in the design process is the control of its pressure. Under normal circumstances, the greater the pressure, the better the quality of the product. The specific requirements of the furniture laminator is that the pressure rise should be stable and the pressure should be controlled. The accuracy is high.

The constant pressure time of the furniture lamination press must be accurately controlled. During the operation of the entire equipment, the pressure in all directions must be uniform. In order to satisfy the lamination process and product production requirements during the operation, the main design of the equipment is required. Should include loading and unloading system, heating system, pressure system and protection system.

Furniture Lamination Press Workflow

1. Heat the water in the container to a constant temperature.

2. Loading of the furniture laminator, the seal head drops.

3 set the working pressure, constant pressure time, and pressure and pressure.

4. Automatically relieve pressure after the pressure is maintained.

5. The seal head rises and the product is removed.

Previous: Door Skin Press Operation Requirements

Next: Melamine Paper Impregnation Line Production Process