Contact Us
Contact: cherry
Mobile: +86-13395117688


Fax: +86-510-83213999
Address: No.20, Changhui Rd., Fengdian Park, Huishan Economic Development Zone, Wuxi, Jiangsu, China

Home > Knowledge > Content
Kitchen cabinet board production line purchase and maintenance
Jun 14, 2018

Kitchen cabinet board production line in the cabinet board, which is specifically solid wood, plastic, double facing, paint, UV paint and high-light Yalik so. Therefore, according to the actual situation and use requirements, to choose and determine, so that the product has a good use of results. There are some specific types of production lines, such as UV cabinet door production lines.


The purchase of kitchen cabinet board production line is an important task. Therefore, it cannot be treated and conducted in a sloppy manner. The factors that should be taken into account when purchasing are the after-sales services for the relevant parameters of the production line, place of production, price quotation, quality, and products, in addition to the manufacturer of the product. These should be considered comprehensively so that the correct judgments and results can be selected and, at the same time, the purchase of the right products for them.


There are many available equipments in the kitchen cabinet board production line, and they can also be classified and summarized, such as the equipment for cutting materials, drilling equipment, and edge sealing equipment. In addition, there are some auxiliary equipment. Therefore, the appropriate equipment should be selected according to the specific types, materials, and requirements of the cabinet board so that the desired product can be obtained.


In the kitchen cabinet board production line, the production equipment it uses is also required to carry out maintenance and to extend the service life of the equipment. Therefore, the following is a brief explanation of its work content.

(1) When the equipment is continuously running every day, it shall not be used beyond the specified time. During use, you should always pay attention to whether there is any abnormality in the working temperature of the equipment. If any abnormality or problem should be solved and solved in time, do not delay so as not to cause serious consequences.

(2) The production equipment of the cabinet plate production line should be cleaned, cleaned, maintained and lubricated in a timely manner after each use. In this way, the normal operation and service life of the equipment can be guaranteed, and the use of the equipment can be guaranteed.

Previous: Aluminum honeycomb panel press equipment and product features and how to buy

Next: Multilayer MDF press product parameters and closing mechanism