Contact Us
Contact: cherry
Mobile: +86-13395117688

TEL:+86-510-83212111

Fax: +86-510-83213999
E-mail: cdp@dipowell.com
Address: No.20, Changhui Rd., Fengdian Park, Huishan Economic Development Zone, Wuxi, Jiangsu, China

Home > Knowledge > Content
Pressing process and process of wood flooring hot press machine
Jan 23, 2019

The wood flooring hot press machine is suitable for the pressing process of plastic materials. Such as powder product molding, plastic product molding, cold (hot) extrusion metal forming, sheet stretching and cross-pressure, bending, turning, correction and other processes. The machine has independent power mechanism and electrical system. It adopts button centralized control, which can realize three working modes: adjustment, manual and semi-automatic.

 

The working pressure and pressing speed of the wooden floor hot press, the line and range of no-load fast-down and deceleration can be adjusted according to the process requirements, and the ejector process can be completed without the ejector process and the stretching process. In the way, each process is controlled by constant pressure and fixed process. The constant pressure forming process has an ejection delay and an automatic return after pressing.

 

The fuselage of the wood flooring hot press machine is a double-column structure, which is welded with full-plate CO2. After welding, it is tempered and tempered to ensure that the fuselage never deforms. The hydraulic system is located inside the fuselage, with beautiful appearance and convenient operation, which can widen the working range.

 

http://www.dipuindustry.com


Previous: Advantages and protection system of synchronization laminating press

Next: Flooring lamination press operation procedure and selection process