Contact Us
Contact: cherry
Mobile: +86-13395117688

TEL:+86-510-83212111

Fax: +86-510-83213999
E-mail: cdp@dipowell.com
Address: No.20, Changhui Rd., Fengdian Park, Huishan Economic Development Zone, Wuxi, Jiangsu, China

Home > Knowledge > Content
Pressure control and constant temperature of multilayer MDF press
Aug 16, 2018

The pressure of the multilayer MDF press is controlled at the critical point in the operation process. Under normal circumstances, the higher the pressure, the better the quality of the product. The pressure of the multi-layer medium density fiberboard press should be stable and the pressure control precision should be High, the constant pressure time should be accurately controlled during operation, and the pressure in all directions is uniform during operation.

In order to meet the lamination process and production requirements of the multi-layer medium density fiberboard press, the main design of the equipment should be effective, including its loading and unloading system, heating system, pressure system and protection system.

The water in the heating vessel of the multilayer MDF press will reach a certain constant temperature, and the loading and sealing head of the product will decrease when the operation is performed, and the working pressure set during the operation will be constant. Press time and apply pressure and pressure.

http://www.dipuindustry.com/


Previous: Cleaning requirements and maintenance inspection of kitchen cabinet board production line

Next: Pressurized protection and supporting use of furniture board laminating press