Contact Us
Contact: cherry
Mobile: +86-13395117688


Fax: +86-510-83213999
Address: No.20, Changhui Rd., Fengdian Park, Huishan Economic Development Zone, Wuxi, Jiangsu, China

Home > Knowledge > Content
The characteristics and working principle of Formica HPL press line
May 09, 2018

In the course of operation, Formica HPL press line is mainly used to heat a part that has been preliminarily coated with good flux to a temperature sufficient to melt and flow the solder. After curing, parts and solder are cured. Form a permanent electrical machinery connection equipment.

In the operation of the Formica HPL press line, its different products can be selected for their heating rate during operation. The titanium alloy press head ensures an even temperature, rapid temperature rise and long service life. The indenter has a specially adjustable horizontal design to ensure that the components are averaged. The temperature is numerically controlled and clear and precise. Digital pressure gauges are available to preset the pressure range.

Characteristics of Formica HPL Press Production Line

1. Formica HPL press production line is mainly used in the process of its pulse heating technology, in the use of precise temperature control, the temperature is the sampling frequency of 0.1s.

2. Various working modes such as single working platform, rotary working platform, and left and right mobile platform of Formica HPL press line.

3. Formica HPL press production line to achieve a certain degree of temperature control.

4. HPL press line real-time temperature curve display.

5. Silicone tape indexing mechanism.

6. CCD vision system provides precise alignment.

7. Large-capacity program is stored.

8. Touch operation interface, program password protection.

Work principle of Formica HPL press line

The pulse heating principle of Formica HPL press production line, due to the special design of the welding head surface during the operation, the resistance of the welding surface is very small, and the current will effectively pass through its resistance when used. The smallest cross-section, by constantly changing the voltage, adjust the current level, making it quickly heat through the welding head.

The Formica HPL press production line is mainly designed with carefully segmented design, low energy consumption, uniform heat transfer, adjustable temperature, uniform insulation, and a temperature difference of ±3°C. Hydraulic system: The main hydraulic components are imported and the pressure is adjustable. Made of precision CNC machining, imported oil seal, no oil seepage phenomenon.

Previous: HPL plywood lamination press important parameters and routine maintenance

Next: Thermal insulation effect and programmable control of alluminum honeycomb board press